Обзор компании

7YRSGuangdong Qike Electronics Co., Ltd.

Add tin

1. The solder joint is full, smooth and free of solder joints. 2. The solder joints are clean and tidy.

Brushing

Scrape the grease with a steel spatula, apply evenly, keep the process clean, no spill grease.

Welding wire

The solder joint is full and the positive and negative poles are separated; the red line is positive and the black line is negative.

Upper lens

Rotate the lens and heat sink with no scratches on the surface, no stains, and do not loosen.

Outer ring

The outer ring of the lock is made of round head screws, the middle ring and the outer ring are centered, and the swing is comfortable and not loose.

Имя	Без	Количество	Проверено

9030 spray machine	HD-P-10	1
Air compressor	HD-P-06	1
Ultrasonic	HD-P-12	3
Cutting machine	HD-P-09	2
Tin stove	HD-P-13	2
V_CUT substrate board machine	HD-P-14	1
Automatic aging machine	HD-P-04	2

Проверено

Размер завода	30,000-50,000 square meters
Местоположение завода	No.16 Beiyuan Road, Jianghai District, Jiangmen City, Guangdong Province, China
Число производственных линий	Above 10
Контрактное производство	OEM Service Offered, Design Service Offered, Buyer Label Offered
Годовой выпуск	US$5 Million - US$10 Million

Производственной линии	Supervisor	Нет. операторов	Нет. в линии QC/QA	Проверено

Проверено

Имя машины	Марка и модель нет	Количество	Проверено

FR9800 intelligent electric tester	HD-P-11	3
GPM SERIES GONIO PHOTOMETER	PM40	1
LIGHT SOURCE ANAL YSIS SYSTEM	WT105	1

Проверено